Fold down
– To fold down: press the button, arrow 1,
and press down the head restraint, ar-
row 2.
– Forward: fold the head restraint toward
the front as far as it will go. Make sure
that the head restraint engages cor-
rectly.
Removing
The head restraints cannot be removed.
Memory function
Concept
The following settings can be stored and, if
necessary, retrieved using the memory
function:
– Seat position.
– Exterior mirror position.
– Height of the Head-up Display.
General information
Different settings can be assigned to two
memory locations.
The adjustment of the lumbar support is not
stored.
Safety information
Warning
There is a risk of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
area of movement of the seat is clear prior
to any adjustment.
Warning
Using the memory function while driving
can lead to unexpected movements of the
seat. Vehicle control could be lost. There is
a risk of accident. Only retrieve the mem-
ory function when the vehicle is station-
ary.
Overview
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button. The LED in the
button lights up.
4. Press the desired button 1 or 2 while the
LED is lit. The LED goes out.
Calling up settings
The stored position is called up automati-
cally.
Seite 108
CONTROLS Seats, mirrors, and steering wheel
108
Online Edition for Part no. 01402628632 - VI/19
To Next Page
Loading...
