Overview
Imprint on the charging cable Charge current setting
"Max." "Reduced" "Low"
6 A 6 A 6 A 6 A
8 A 8 A 6 A 6 A
10 A 10 A 7.5 A 6 A
12 A 12 A 9 A 6 A
15 A 15 A 11.25 A 7.5 A
Depending on the charge current setting,
the charging duration changes.
Maintaining the charge state
To conserve the electrical range for a later
time during the trip, SAVE BATTERY, refer
to page 123, can be used to maintain or in-
crease the current state of charge of the
high-voltage battery.
Safety information
Warning
Improper working with electrical current
can lead to an electric shock due to high
voltages or high currents. There is a risk
of fire or danger to life. Observe the gen-
eral safety regulations when working with
electrical current.
Warning
A faulty and incorrectly designed charging
device at the charging location can cause
damage to the vehicle and overload the
power mains at the charging location.
There is a risk of fire and a risk of injury.
The manufacturer of your vehicle recom-
mends that, prior to your first use of a
charging location, you have the compati-
bility of the following components con-
firmed:
– Charging cable.
– Charging station.
– Household socket and connected cir-
cuits.
Warning
Damaged or worn charging devices, for in-
stance worn contacts, can heat up. There
is a risk of fire. Only use charging devices
that are in good condition.
Warning
Simultaneous charging and refueling poses
a risk of fire if a sufficient safety distance
from easily flammable materials is not
maintained. There is a risk of injury or risk
of damage to property. Do not fill the vehi-
cle with fuel and charge it simultaneously.
Seite 255
Charging the vehicle MOBILITY
255
Online Edition for Part no. 01402628632 - VI/19
To Next Page
Loading...
