make a video. The resolution for video file is 720*480, and frame number is 29--30fps/S. Then
short press Record / Stop button, video is stopped and saved automatically. After saving the red
indicator light remains light. If you need to continue to video, please press Record / Stop button
slightly once more.
Notice:
a. Please make sure T-flash (Micro SD) card has been inserted, if not, it will be power off
automatically after 30 seconds.
b. The maximum capacity of T-flash card is 8GB.
c. Saving file needs certain time, so please don’t press Operation button continuously in order
to avoid saving unsmoothly and generating incomplete file.
d. When you make a video, please focus on the object and keep 50cm under sufficient
illumination. Then the video will be right, natural color, clear and stable.
3. Sound control video (optional)
Press Power button slightly, yellow indicator light begins to bright, now it enters into startup ready
mode, which can enter into standby mode quickly. At that time, press MODE button slightly, and
then you can switch into sound control video mode. Now yellow indicator light always brights,
red indicator light flash quickly (indicate sound control standby mode). When decibel of video is
more than 60, then it will be video automatically. At the moment, yellow indicator light always
brights, red indicator light flash slowly. (Indicate under sound control video)
When sound control starts, the shortest shoot time is 2 minutes. After 2 minutes, if there is no any
sound, MD80 will save file automatically and switch into standby mode. If there still has sound
after 2 minutes, MD80 will continue to shoot.
4．Time set
There is a CD with the product which contains a file named time synchronization file. Please copy
it to TF card. When connect MD80 with computer, whose time will be displayed with computer
synchronously.
The detail as following:
1> build a text called TAG.TXT under root directory of card.
2> open TAG.TXT,write synchronous date according to enclosure stricktly.
Details as following:
[date] need space with newline
2009/07/22 need space with newline
12：00：00
3> Copy the file TAG.TXT to the TF card in MD80, then pull out from computer and power off.
4> Power on the machine MD80 everytime, system will check and analyse TAG.TXT, then set
system time according to file time. After that the text will be deleted by system automatically.
5．Power off
Under video mode or standby mode, please long press Power button 3 seconds, then release till
indicator goes out. Then the machine is turned off.
To Next Page
Loading...