Mini DV-MD80 - User Manual

MINI DV MD80
User Manual
Thank you for purchasing MINI DV—MD80. It has adopted unique ultra-portable design, which
makes it apply to every area. MINI DV—MD80 brings more convenience, safety and funs to your
daily life.
I Characters of Product
 It has small contour design, which does UV spray finishing for the whole body. It is very
fashionable and wearable and matches with all kinds of portable tools.
 Support PC camera and chatting function.
 Support AVI video format.
 It can carry out high definition image recording under low illumination.
 Support 30 fps for 720*480
 Support USB1.1 and USB2.0.
 Support 8GB T-flash card.(maximum)
 Build-in lithium battery which can make a video more than two hours
II Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so when you use it the first time, please charge
firstly. The method for charging as following:
1.) Connect computer: use USB cable to connect the computer, then it can be charged.
2.) Use adaptor: connect charger plug with USB cable, then plug into electrical connector
receptacle, it can be charged.
When you charge it, green light and red light will bright simultaneously, of which states are
stillness.
Notice: when battery power is not enough, MD80 will enter into protection mode, so it cannot be
turn on. Now, please charge for it.
2. Power on to video
Press Power button slightly, yellow indicator light begins to bright, now it enters into startup ready
mode, which can enter into standby mode quickly. Press Record / Stop button slightly, yellow
indicator light begins to bright, red indicator light starts to flash slowly. At this time, it begins to

Mini DV-MD80 Specifications

General

Brand	Mini
Model	DV-MD80
Category	Car Receiver
Language	English

Summary

Operation Guide

Charge Device

Details the procedure for charging the built-in lithium rechargeable battery using a USB cable connected to a computer or an adapter.

Power On and Start Video

Explains how to power on the device and start recording video, including indicator light behavior.

Sound Control Video Mode

Describes how to switch to and use the sound-activated video recording mode, including its standby and recording states.

Set Device Time

Details the process for setting the device's time by creating and copying a TAG.TXT file to the TF card.

Power Off Device

Provides instructions on how to properly turn off the device by pressing and holding the power button.

Connect to Computer

Explains how to connect the device to a computer as a U disk for file management and data transfer.

Use as PC Camera

Guides on installing drivers and using the device as a PC camera, including mode switching.

Reset Device

Details the procedure for resetting the device using the reset button when it malfunctions.

Important Notices

Provides important notices on legal use, software upgrades, and operating temperature.