Mini E - Page 104

Indicator and warning lamps
102
Charging not possible.
Lights up while vehicle is moving. Drive may be continued. The vehicle
can no longer be charged. Contact
your MINI Dealer.
Lights up while vehicle is stationary:
> Temperature of high voltage bat-
tery outside of range in which
high voltage battery can be
charged.
Let the high voltage battery cool if
necessary.
> Charging station, power socket or
charging cable faulty
Have the charging station, power
socket and charging cable checked
for faulty insulation and a faulty
ground wire.
Contact your MINI Dealer.
Only use power sockets with a
ground wire.
Selector lever position P not engaged.
Charging process cannot be started.
Move selector lever to position P to
activate charging process, page 74.
Selector lever position N was
engaged automatically, e. g. if vehicle
is stationary and driver's door is open.
Close driver's door, depress brake
pedal and move selector lever to posi-
tion N.
Select desired selector lever position.
> Malfunction in high voltage sys-
tem
If it is not possible to continue driving,
contact your MINI Dealer.
> High voltage system switched off You cannot continue your journey.
Contact your MINI Dealer.
Charge status of high voltage battery
> Warning lamp goes out after brief
period:
Charge status equals approx.
30%.
> Warning lamp lights up perma-
nently: Range is down to approx.
10 miles/16 km.
1 2 Cause What to do
Online Edition for Part no. 01 41 2 601 475 - © 11/08 BMW AG