REFERENCE AT A GLANCECONTROLSDRIVING TIPSMOBILITY
51
Current vehicle speed
To have the current speed shown in the upper
display otherwise serving for the outside tem-
perature display and clock.
1. Press the button in the turn indicator lever
repeatedly until the current speed appears
in the lower display.
2. Wait for the speed display to automatically
move to the upper display.
The outside temperature then appears in the
lower display of the computer.
Settings and information
Operating principle
Certain settings and information are only avail-
able when the ignition is switched on, the vehi-
cle is at a standstill and the doors are closed.
1 Button for:
> Selecting display
> Setting values
> Confirming selected display or set values
> Calling up computer information 50
2 Calling up Check Control 55
3 Displaying vehicle check 56
4 Initializing the Flat Tire Monitor 60
Resetting the Tire Pressure Monitor 62
5 Setting formats and units of measure, reset-
ting to factory settings 53
6 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle 22
> Response during unlocking
procedure 21
> Automatic locking 24
> Pathway lighting 67
> Daytime running lights 68
> Triple turn signal activation 44
7 Setting the time 55
8 Setting the date 55
9 Exiting the menu
Online Edition for Part no. 01 41 2 602 902 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 902 - © 08/09 BMW AG
To Next Page
Loading...
