EasyManua.ls Logo

miniland thermoadvanced easy - Page 36

miniland thermoadvanced easy
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
Declaration - electromagnetic immunity
The device is intended for use in the electromagnetic environment specified
below. The customer or the user of device should assure that it is used in such
an environment.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic
environment - guidance
Conducted
RF
IEC 61000-
4-6
3V
0.15 MHz to
80MHz
6 V in ISM
and amateur
radio bands
between 0.15
MHz and 80
MHz
Not applicable
Portable and mobile RF
communications equip-
ment should be used no
closer to any part of device,
than the recommended
separation distance cal-
culated from the equation
applicable to the frequency
of the transmitter.
Recommended separation
distance
150KHz to
80 MHz
80MHz to
800 MHz
800MHz to
2,7 GHz
where P is the maximum
output power rating of the
transmitter in watts (W)
according to the transmitter
manufacturer and d is the
recommended separation
distance in meters (m).
Field strengths from fixed RF
transmitters, as determined
by an electromagnetic site
survey, a should be less than
the compliance level in each
frequency range.
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
Radiated RF
IEC 61000-
4-3
10V/m
80 MHz a 2,7
GHz
10V/m
ENGLISH

Related product manuals