MINIPURE MIN-6 User Manual

16 pages

To Next Page

Extensive Product Information Available at:

ultraviolet.com

buyultraviolet.com

• ASSEMBLED IN THE USA

Installation,

Operation

& Maintenance

Read and Follow All Safety Instructions. Save These Instructions.

Models

Ballast

120v 50/60 Hz

Ballast

230v 50/60Hz

MIN-6 10-0508B 10-0504B

MIN-9 10-0508B 10-0504B

Owner

’

s Manual

Owner

’

s Manual

ULTRAVIOLET WATER PURIFIERS

Questions and Answers:

C
Cameron HartJul 26, 2025
Why is my MINIPURE MIN-6 Water Filtration Systems leaking?
- W
  William CampbellJul 27, 2025
  If your MINIPURE Water Filtration System is leaking, there are several potential causes. It could be due to a cracked or broken quartz sleeve, worn or damaged quartz sleeve sealing O-rings, or poor or loose connections or fittings. To address this, tighten any suspect connection or fitting. If that doesn't work, shut down the purifier, drain it, and remove the fitting or connection. Clean the threads, reapply thread sealing tape, and reinstall.

MINIPURE MIN-6 Specifications

General

Brand	MINIPURE
Model	MIN-6
Category	Water Filtration Systems
Language	English

Summary

Safety Information

Safety Warnings, Instructions, and Labels

Covers general warnings, precautions, and explanation of hazard symbols on the unit.

Product Overview

Application, Operation, and Water Quality

Details intended use, construction, operation, limitations, and water quality requirements.

Installation

Location and Recommended Setup

Guidance on choosing a site and basic plumbing setup for the purifier.

Dimensional Data

MIN-6 and MIN-9 Dimensions

Provides a diagram and table with physical measurements for both models.

Installation Procedures

Model-Specific Installation Steps

Detailed steps for installing MIN-6/MIN-9, safety, connections, plumbing, and disinfection.

Maintenance and Service

Inspection and Routine Maintenance

Procedures for inspecting the unit, cleaning the quartz sleeve, and general care.

Lamp and Quartz Sleeve Replacement

Step-by-step instructions for replacing the UV lamp and servicing the quartz sleeve.

Broken Quartz Sleeve and Lamp Disposal

Procedures for handling broken quartz sleeves and proper disposal of mercury lamps.

Technical Specifications and Support

Troubleshooting Common Issues

Identifies problems, possible causes, and corrective actions for purifier operation.

Technical Specifications

Lists detailed technical data, flow rates, dimensions, and power requirements for models.

Replacement Parts and User Support

Provides part numbers, an exploded view, and user assistance/warranty information.