Miniso K616-833 - User Manual

K616-833 wireless keyboard and mouse set
manual
Features:
1. The keyboard and mouse share a USB receiver and both the keyboard and mouse have their
own receiver storage compartment to prevent loss
2. 2.4G connection, 10 meters stable transmission distance
3. The bottom bracket design of the keyboard can adjust the angle of the keyboard for easy use
4. Low power consumption, automatically enter power saving mode when not in use
5. Mute mouse buttons
Specification Description:
mouse:
1. Size: 9.8cmx5.8cmx3.7cm
2. Color: pink
3. Connection: 2.4G
4. Number of keys: 3 keys
5. Working voltage: 1.5V
6. Working current: 25mA
7. Working temperature and humidity: -25～55℃/<85%RH
8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
keyboard:
1. Size: 36.6cmx13.1cmx2.4cm
2. Color: pink
3. Connection: 2.4G
4. Number of keys: 100 keys
5. Working voltage: 1.5V
6. Working current: 20mA
7. Working temperature and humidity: -25～55℃/<85%RH
8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
Instructions:
Open the battery cover at the bottom of the keyboard, take out the receiver, insert the receiver
into the USB port of the computer, put a AA battery (AA battery) into the battery slot, cover the
keyboard battery cover, and then open the battery cover of the mouse to put a battery Insert AA
batteries (AA batteries) into the battery slot and then cover the mouse battery cover to use.
Precautions:
1. Do not expose the battery to humidity and high temperature, and avoid contact with
conductive materials or liquids
2. Do not short circuit
3. Do not disassemble or attempt to repair this product by yourself.

Summary

Product Specifications

Mouse Specifications

Details of the mouse including size, color, connection, keys, voltage, current, temperature, humidity, and supported operating systems.

Keyboard Specifications

Details of the keyboard including size, color, connection, keys, voltage, current, temperature, humidity, and supported operating systems.

Setup Instructions

Safety Precautions

Storage Method

Receiver Information

FCC Compliance

FCC Rules and Conditions

Device compliance with Part 15 of FCC Rules, including conditions for non-interference and acceptance of received interference.

Interference Mitigation

Measures to correct harmful interference to radio or television reception, such as reorientation or relocation of antennas.

RF Exposure Evaluation

Evaluation of the device for general RF exposure requirements, allowing portable use without restriction.

ISED Compliance

ISED Rules and Conditions

Device compliance with Innovation, Science and Economic Development Canada's licence-exempt RSS(s) and operating conditions.

Prohibition on Co-location

Requirement that the transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure Assessment

Device evaluation for general RF exposure requirements, permitting portable use without restriction.

Miniso K616-833 Specifications

General

Brand	Miniso
Model	K616-833
Category	Keyboard
Language	English