NEO X39 connects to your TV or PC monitor via either a HDMI or
USB-C port.
Step 1: Connect the Cable [HDMI or/and USB-C]
Connect one end of the cable to the corresponding port on your
TV/PC monitor, and the other end to the port on NEO X39.
Step 2: Connect the Power
Connect the supplied 12V power adapter to the power-in jack.
Press and hold the power button for 2-3 seconds to power on,
the blue power LED should then glow.
Step 3: Turn on your TV/PC monitor and select the input
Turn on your TV or PC monitor and select the corresponding port
connected to the NEO X39.
Basic Setup
To Next Page
Loading...
Need help?
General