Folded paper installation
(1) Open the top cover of the machine, press the inlet paper guide rail at the same
time,According to the size of the folded paper, adjust the guide rail spacing.
(2) Put the folded paper into the inlet paper guide rail, and cover the top cover.
(3) Confirm that the printer has detected the paper feeding, and move the paper
suction and normal paper output.
Solution for stuck paper
(1) Facing the front of the machine, pull the upper cap lever forward and lift the upper cap.
(2) Remove the jammed paper from the feedin channel,and check whether the print head
has adhesive or carbon deposition.If yes,clean it with an alcohol cloth,remove the wrinkled
paper and replace it with newpaper .
4
To Next Page
Loading...