1 | minnkotamotors.com
©2020 Johnson Outdoors Marine Electronics, Inc.
• Torque Wrench
• 1/2” Box End or Socket Wrench
• A second person to help with
installation
Item /
Assembly
Part # Description Qty.
2
2351959 BRACKET,STRBD 2/4 PAINTED 1
2351949 BRKT, STRBD 2/4. PAINT WHT *white* 1
4
2351958 BRACKET,STRBD 2/6 PAINTED 1
2351948 BRKT, STRBD 2/6, PAINT WHT *white* 1
s
2354910 INSTRC-INSTALL, JACKPLATE 1
6 2353411
SCREW-3/8-16X1.75 SET SSTL
*PRE-INSTALLED*
4
8 2353103
NUT-3/8-16, ACORN SS
*PRE-INSTALLED*
4
10 2371758
WASHER-3/8 HD FLAT SS
*PRE-INSTALLED*
4
12 2352901
RETAINER,STUD,ANCHOR BRKT
*PRE-INSTALLED*
1
A
Items 14 - 22
2994939 BAG ASM,JACKPLATE HDW,RPTR 1
14 2371757 WASHER-1/2”, HEAVY DUTY, SS 4
16 2373108 NUT-1/2-13, NYLOC, SS 2
18 2373519 BOLT-1/2-13 X 3” HHCS SS 2
20 2353102 NUT-3/8-16 FLANGE,NYLOK,SS 4
22 2378608 ANTI SEIZE TUBE, 4CC 1
TOOLS AND RESOURCES REQUIRED
RAPTOR STARBOARD 4” & 6”
JACK PLATE BRACKET
1810360, 1810365, 1810362 & 1810367
✖ This part is included in an assembly and cannot be ordered individually.
s Not shown on Parts Diagram.
NOTICE: The kit purchased will contain either Item #2 or Item #4 based on if a 4” (1810360 or 1810365 - white) or 6”
(1810362 or 1810367 - white) Starboard rise was selected. This kit is mounted directly to the Starboard side of a Jack Plate. It
may also be mounted directly to a Raptor Universal Sandwich Adapter (1810372 or 1810377 - white). The Raptor 3” Setback
Bracket (1810370 or 1810375 - white) may be added to these Jack Plate brackets for additional mounting options.
4
2
16
22
20
14
18
A
The Raptor Starboard 4” & 6“ Jack Plate Bracket installs directly to the Jack Plate on the Starboard side of your boat.
MOUNTING CONSIDERATIONS
Before mounting your Raptor Jack Plate Bracket, please give consideration to the following:
1. The Jack Plate Bracket will only work with compatible Jack Plate designs and may not work with all Jack Plates. Please refer to the chart
below for compatible Jack Plate designs. Instructions follow by Jack Plate style in the order listed in the chart. If your Jack Plate is not
listed use of the Universal Sandwich Adapter (1810372 or 1810377 - white) either between the transom and Jack Plate, or between the
Jack Plate and Outboard will be necessary.
Manufacturer Model Offset
TH Marine
Atlas Hydraulic 4” Thru 12”
Z-Lock Manual 6” Thru 12”
R&R Designs
Slidemaster Manual 6” Thru 12”
Bob's Machine Shop
Action Series 6" Thru 14"
Standard Series 6" Thru 14"
To Next Page
Need help?
General
