1 | minnkota.johnsonoutdoors.com
©2023 Johnson Outdoors Marine Electronics, Inc.
MKA-56/RTA-55 COMPOSITE
QUICK RELEASE BRACKET
1854056 & 1854055
TOOLS AND RESOURCES REQUIRED
88
22
66
2424
1818
1414
2626
2020
CC
• #3 Phillips Screwdriver
• #4 Phillips Screwdriver
• Drill
• 13/32” Drill Bit
• 9/16” Box End or
Open End Wrench
• Needle-nose Pliers
(for Terrova and RT Terrova)
• Scissors
• Awl or similar marking tool
• A second person to help
with the installation
p Not shown on Parts Diagram.
The MKA-56 and RTA-55 are compatible with freshwater and saltwater electric-steer, bow-mount, QUEST series trolling motors, including the
Riptide Instinct, Ulterra, Riptide Terrova and Terrova.
BB
AA
1212
1212
1010
44
2222
1616
2828
NOTICE: Images are a graphical representation and
may vary from your motor. Save the box! A template for
installation is printed on the inside of the box.
Item /
Assembly
Part # Description Qty.
A
Items 2-4
2771686 INNER PUCK BL COMP QRB BLK *BLACK* 1
2771687 INNER PUCK BL COMP QRB WHT *WHITE* 1
2
2371686 PLATE,PUCK BACKUP,BLK ANDZD *BLACK* 1
2371687 PLATE, PUCK BACKUP, WHITE *WHITE* 1
4
2371695 PLATE-INNER, COMP FW BLK *BLACK* 1
2371696 PLATE-INNER, COMP SW WHT *WHITE* 1
6
2371697 PLATE-OUTER, COMP FW BLK *BLACK* 1
2371698 PLATE-OUTER, COMP SW WHT *WHITE* 1
B
Items 8-12
2770916 HANDLE ASM BL COMP QRB 1
8 2370916 HANDLE, HALF ROUND, ANODIZE 1
10 2372641 PIN-SHEAR, HANDLE 2
12 2383417 SCREW-5/16-18X3/4"BHCS 2
C
Items 14-28
2994946 BAG ASM,ELEC.STEER COMP QRB 1
14 2372634 PIN-PADLOCK, ALUM QRB 1
16 2383404 SCREW-1/4-20X7/8 PFH SS NYS 1
18 2260800 CLIP-HAIR SPRING,SS,MAX BG 1
20 2383485 SCREW-3/8-16 X 2 1/4 BHCS 6
22 2383490 SCREW-3/8-16 X 3" PFHCS SS 6
24 2351734 WASHER-3/8" FLAT SS 6
26 2383122 NUT 3/8-16 NYLON INST LOCKNUT 12
28 2378608 ANTI SEIZE TUBE, 4CC, TALON 1
p
2374949 INSTRC. ELEC.STEER COMP QRB 1
Complete Typical Installation
WARNING
You are responsible for the safe and prudent operation of this
product. Minn Kota has designed this accessory to be a reliable
and convenient tool. Use only as directed and only for the
designed intent of the product. Installation should occur in an
area free from hazards and obstacles. This product does not
relieve you from the responsibility for safe operation.
To Next Page
Need help?
General
