• BEFORE USING YOUR MINOlTA AUTOPAK-8 K7
=============================:
1.
Check Battery Condition
Push the red battery check button
flr mly. The needle in the battery
check window will move into the
white area if the batteries are
working satisfactorily.
9
2.
Check Exposure Meter
Sight through the flnder , paint the
camera toward a bright light and
move your hand back and forth
across the lens. If the meter is
registering, the needle at the top
of the viewfinder will swing back
and forth across the scale.
3. Set the Motor
Turn the single frame control to
"RUN" and press the shutter re-
lease. A constant, low hum will
indicate proper motor operation.
To Next Page
Loading...
