2928
Subjects outside the focus frame may not be in
focus. Use focus lock to ensure accurate focusing.
1.Place the focus frame on your subject.
FOCUS LOCK
5.When the green ready lamp
glows, press the shutter-release
button all the way down to take
the picture.
• Press the shutter-release button with
slow, steady pressure.
• The film automatically advances to the
next frame.
• After use, press the main switch to turn
the camera off.
• The flash will fire automatically in low-light (p. 39).
FULL-AUTO OPERATION
Continued on next page.
To Next Page
Loading...
