1716
1.Slide the back-cover release
down to open the back cover.
LOADING THE FILM
• This camera has a safety-lock feature that prevents the camera from
being opened accidentally when film is loaded. The film-chamber lock
should automatically release when the film is rewound.
• Use only 35mm, DX-coded film rated between ISO 25 and 3200.
• Do not use Polaroid instant 35mm film. Winding problems may occur.
• ISO 400 film is recommended for best results.
• Always load and unload film in subdued light.
Briefly appears. Power is sufficient for
all camera operations.
Replace the battery. The shutter will
lock until the battery is replaced.
Each time the camera is turned on, a symbol will appear on the data panel to
indicate the power status of the battery.
Power is sufficient, but the battery must
be replaced soon.
BATTERY CONDITION INDICATOR
Continued on next page.
If the back cover does not open when the
film is not loaded, turn the main switch off
and on to release the film chamber lock.
To Next Page
Loading...
