Preparations before taking pictures and basic photography operations
How to use the strap
(Fig. 1)
Damage protection cover ⓐ fits on to strap
attachment clip 薩. Insert fitting ⓑ between the
metal clasp and squeeze the clasp to expand it,
then pass through the opening in the strap
attachment clip. Attach by passing the strap
through the ring in the fitting and the hole on the
damage prevention cover.
★ Use the protrusion on the plastic piece of the
strap for ease of pushing the Manual Rewind
Switch 参.
1. Loading the Battery
(Fig. 2)
This camera will not operate without a battery
loaded.
★ Turn off the main switch first before installing
new batteries or replacing old ones.
Place a coin or similar object into the groove on
the battery compartment cover 撒 and turn in
the direction of the arrow to open the battery
compartment cover.
Insert the batteries so that they are correctly
placed with positive
+
and negative
−
terminals
in the directions indicated by the diagram inside
the battery compartment, then close the battery
compartment cover into its original position.
★ If the batteries are incorrectly inserted into the
battery compartment, not only will the camera
fail to function correctly. Such incorrect
placement may damage the camera.
Turn main switch lever 札 to turn power on (Fig.
5) and check display panel 捌. If the black
battery mark is on, then the batteries are fully
charged.
To Next Page
Loading...
