★ Maximum picture-frame speed is 2.5 frames per
second. However, frame speed will change
depending on shutter speed, sensitivity of the
film being used and battery level.
4. Display Panel
(Fig. 7)
The diagram shows all crystal displays in the “on”
state.
Ⓐ Battery power Symbol
Ⓑ Film counter
Liquid Crystal Display
This camera uses the liquid crystal in the Display
Panel.
★ The LCD display darkens at high temperatures,
and the response is slower at low temperatures.
★ The LCD returns to correct operating
characteristics at normal temperatures.
5. Using the viewfinder
(Fig. 8)
The indicator inside the finder lights up when
power goes ON and when the shutter release
button 殺 is pushed part of the way down in the
power ON state. The light-meter will stay on for
about 15 seconds, at which time power will go off
automatically and the indicators inside the finder
will go off. When the shutter button is partially
pressed, it will re-light.
★ The diagram shows all data in lighted state.
A. LED indicators (displays shutter speed or
exposure warning). → See Fig. 23 and 24.
B. Battery charged indicator (When the batteries
used in the dedicated flash are fully charged
“125
” lights up. → See Fig. 35
C. Exposure control mark (The +/
−
sign lights up
while the exposure is being adjusted). → See
Fig 30.
D. View frame → See Fig. 9.
To Next Page
Loading...
