VIEWFINDER
As you look th rough the view-
finder of your SR-T, you can see:
22
0 Meter needle (responds to light)
f) Follower (align with meter needle
for correct match-needle exposure)
@Metering range limits (match-
needle exposure
will not be correct
when meter needle is outside these)
0 Battery-check mark (meter needle
points to th is to show sufficient
power when switch on base turned to
"B.C.")
0 Focusing spot, microprism type in
SR-T 200 and 201, split-image/micro-
prism type (shown here) in the 202.
In the 201 and 202, you can also see:
0 Shutter-speed scale with indicator
to show speed set
The 202 further shows above frame:
0 F-number of lens aperture set.
For further details, see the follow-
ing sections on exposure control and
focusing, and on battery checking
(p. 11).