26
"B" (bulb) setting
With the "B" on the shutter-speed selector
dial aligned with the red index, the shutter will
open when the release is depressed and remain
open until it is released. The match-needle
method is not intended to produce correct
exposure at this setting.
With the SR-T 201 and 202, the shutter
setting will be indicated on the scale below the
frame in the finder. With the SR-T 202, the
f-number of the aperture set will also appear
centered above the frame with most lenses.
(Positions of shutter-speed and f-number indica-
tions are shown on p. 22.)
NOTE
• Shutter-speed dial and aperture ring should
not be set between their click-stops.
• Do not use the
"B" shutter
setting with
match-needle exposure control.
To Next Page
Loading...
