Connecting flash uniu
Bracket•type flash units (such as Minolta's
Auto E lectroflash 450) are physically attached
to your SR·T by means of its tripod socket and
usually connected electrically by means of a
sync. cord with a PC terminal.
Clip-on•type units (such as Minolta's Auto
Electroflash 22) are physically attached by
sliding them into the accessory shoe on top of
=-
. Ir -.·:
the camera; whether and how they must be
electrically connected depends upon the flash
unit type and SR-T camera model:
With the SR-T 200, the sync. cord from the
flash unit must be plugged into either the
terminal designated "X" or "FP" as appropriate
for proper sync. connection. Units without
cords cannot be synchronized.
37
To Next Page
Loading...
