36
FLASH PHOTOGRAPHY
NOTE
Synchronization
Your SR-T has shutter contacts for X or FP
flash synchronization as follows:
The "60" on the shutter-speed dial is
colored red to indicate that 1/60 sec. is the
recommended speed for X-delay flash, though
slower speeds as indicated can be used under
certain conditions if desired for particular
effects. Be sure not to use speeds faster than
1/60, (i.e., 1/125 upward) with electronic or
auto-flash units. FP flashbulbs synchronize
properly at all shutter settings.
Sync. type
Type of flash
Shutter settings for proper sync.
Electronic
B, 1, 2, 4, 8, 15, 30, 60 only
flash ("strobe")
X
Most class M or
B, 1, 2, 4, 8, 15 only
MF flashbulbs
FP
Class FP
All settings
flashbulbs
To Next Page
Loading...
