Mat-Fresenel-field focusing screen with centered focusing aid: ,t>3mm microprism
spot in SR-T 200 and 201, ,t>2.5mm horizontal split-image spot surrounded by
1.5mm microprism band on SR-T 202.
Meter needle and circle-tipped follower for match-needle exposure control,
coupled metering-range limits, and battery-check indication all silhouetted within
the viewfield; shutter-speed scale and setti·ng indicator visible below the frame in
SR-T 201 and 202; lens aperture set on most Minolta lenses appears above the
frame in frame in SR-T 202.
Flash sync.: X or FP delay: Through separate PC terminals on SR-T 200; 201 adds an X-sync.
hot shoe; through single PC terminal or hot shoe on 202; X contact: Electronic
flash synchronizes at 1/60 sec. and all slower settings including B; FP contact: FP
flashbulbs synchronize at all settings through 1/1000 sec.
Hot-shoe contact disconnected when a unit not inserted
Film advance: Lever type, single- or multiple-stroke, 150° winding angle after 20° enengaged
movement to allow offsetting from body
Advancing-type exposure counter reset automatically when camera back is
opened.
Safe Load Signal indicates film alignment and advancing condition on SR-T 202.
Multiple exposures possible with rewind button on SR-T 202.
Self-timer: On SR-T 201 and 202 only; lever-type, approx. 10 sec. maximum delay
Other: 4-slot take-up spool; ASA/DIN conversion scale on back cover; conversion scale
surrounded by memo holder on SR-T 201 and 202
Dimensions: 145 x 47.5 x 95mm (5-3/4 x 1-7/8 x 3-3/4 in.) without lens
Weight: SR-T 200: 6909 (24-5/16 oz.), SR-T 201: 7059 (24-13/16 oz.), SR-T 202; 7109
(25 oz.) without lens
To Next Page
Loading...
