Minolta SRT 101 - A. Dismounting of Top cover; B. Dismounting of Bottom cover

2.
6,
A. Dismounting of Top cover
Take out the front cover index screw (9151)disposed on the front frame.
Pull out the rewinding knob(3855 set) so as to open the back cover and insert the fulcrum
point
of
a
pincette
into
a
slot
in
the
rewinding
shaft(3354)
so
as
to
unscrew
and
take
out
the rewinding knob(3355 set).
Take out the rewinding seat (3353).
Take out the winding lever cap(3171) and take off the winding lever spring(3158), the
washer
(W-28)
and
the
winding
lever(3155
set).
Loosen
and
take
out
one
setscrew
(B31-1.7%2.5)
of
the
speed
dial
so
as
to
take
out
the
speed
dial
scale
plate(2151),
the
sensitive
plate
sheet
(2153),
the
sensitive
plate
spring
(2005)
and the speed dial ring(2155).
Loosen
and
take
out
three
screws
(B21-1.7%3)
so
as
to
pull
out
the
top
cover(1004)
from
the camera body.
Caution: The shutter button(3153) and the coupling washer(3159) in the camera body are
1.
apt
to
be
taken
off
so
that
care
should
be
taken
not
to
loose
them.
B. Dismounting of Bottom cover
Loosen and take out two setscrews(B31-1.73) and pull out the bottom cover(1005) from
the camera body.
)
1
See
4
_—_=
LA NOT try as
Wes :
yest tas)
Tey fp