Minolta SRT 101 - E. Disassembly of View-finder and Meter block

E. Disassembly of View-finder and Meter block
Dismantle the viewfinder, meter block. (See P. 4)
Disconnect
the
prism
pressure
support
spring(5072)
which
is
engaged
with
the
prism
pressure spring (5069).
Loosen and take out the setscrew(B11-1.73), and then take out the pressure spring (5069)
and the pentagon prism(5803 set).
Take out the coupling washer(E-0.8)and then pull out the AV middle pulley-B (4073) and
take out the middle pulley-B axis(9154). Loosen and take out one setscrew (B11-1.7 X2.5)
so as to take out the exposure meter moving coil set (4391).
Loosen
and
take
out
four
setscrews(B31-1.7x2)
from
the
beneath
of
the
condenser
holder
(5064),
and
then
take
out
the
prism
holder(5025
set),
Then
take
out
from
the
condenser holder (5064), the condenser pressure-B(5065), the pressure-F (5067), the con-
denser lens (5804), the fresnel lens(5805)and the condenser holder (5064).