Minolta X-300 - Page 32

31
@ Shutter assembly- I
Assemble the parts in the order (1)~@
2114
Brig
ican
Brie 3 | .
2nd curtain
shutter gear Binstail the shutter curtain 0215
' on the curtain shaft side
[GS] 704 iFig 21 | betorenanc. ®
|
ova -0150-13
Rm @
lst curtain
shutter gear
(a) 704 (Fig 1) a
j Charge gear Ag WTo attach of detach the shutter curtain,
9721-0150-13 : slightly widen the bearing part in the
Ys. @ivection of the arrow.
B
Positioning
man)
2nd
curtain
ae
-
i stop lever
oeis-daterer tx'21 7
3-BOND 1401
© Bagust 1 st
® curtain position 247 (x 2)
(P. 33) beforenand.
| 2143
213) Bow to install 4
! i (Fig & 9
Pat 2132
: = cents clockwise \
2148
®
Cc
{B] 3-Bono 14018 OY
BW Remove parts in the orger @~O
P—— 1 st curtain spring cylinder
—2 nd curtain spring cylinder
6 IBFit the spring cylinder side onto the shutter base plate (refer to the
next page), and set up the 2nd curtain stutter gear before fitting onto
Shutter
curtain
the
curtain
shaft
side.
Shutter base
plate
Curtain shatt
Bddijust the curtain position after assembly. (P, 33)
24a
HiCan be set in any position