Minolta X-300 - Page 43

Cause J
Symptom Page| SW Lead Wire SL fdump lead} Ic-! \c-2 OTHERS
LED indication is normal with flash fully charged. But flash does not fire properly. 20, 22. %
x (I) Flash does not fire, Shutter stays open. IS | SX2° | 27(Parpie), 28(Purple} By termteal
3 LED indication failure with flash fully charged.
(1) "1/60" does not blink. Metered shutter speed LEDs light on. Shutter does not 15 30(White) @ 1, 4l B F; terminal
be operate as Auto X.
<_<
vo (2) "1/60" does not blink; remains ON, Flash fires with shutter operated as Auto X. 1s 43 a
Cc
a (3) “1/60" does not blink. Metered shutter speed LEDs blink. Firing without shutter 15 “i 6
® operated as Auto X.
sy
2 .
=
8
[4)
LEDs
of
metered
shutter
speed
and
1/60
blink,
and
flash
does
not
fire.
15
25
(Black),
26(Black)
ow
RRL
[ie
no (5) “L/60" does not blink. Metered shutter speed LEDs light on. Sh di
2 a Pi on, Shutter does not
‘tc & operate as Auto X.---Monitor lamp of flash unit will not light up. 13 27(Purple), 28 (Purple)
=
Be 4
5 3 (6) LEDs do not light up at all, Shutter operates as Auto X, and flash fires. 5 B-D
i o (7) When pressing AE lock button after 1/60 blinks, metered shutter speed LED blinks. 15 31
Shutter operates at metered shutter speed, and flash fires,
Winding is impossible by motor drive. 16 48 Wy terminal
ke
fe No LEDs light with metering SW. (Sq or $,) ON of Motor Drive. 16 47 W, terminal
o
Shutter is not released by Motor Drive. 7 W terminal