Minolta XE - Selection of Rp

WSelection of Rp
| oe
Find the resistance value of Rp according to the attached data or calculating formula with each
resistant value obtained in the measurement of RLL Bvs5s and Ruu Bvs.
. Select from the table below the resistance closest to the resistance value obtained by the
attached data or calculating formula and solder the terminal “C” and Rp.
Rp resistance (KQ) | Rp available (KN)
78>Rp 081-8312 ( 75KN) CdS front “C"
78=Rp< 86 081-8313 ( 82KN)
86<=Rp< 95 081-8314 ( 91KN)
95=Rp< 105 081-8315 (100K)
105<Rp< 115 081-8316 (110K)
115sRp< 125 081-8317 (120K)
125<Rp< 140 081-8318 (130KN)
140<Rp< 155 081-8319 (150K)
155SRp<170 081-8320 (160KN)
170=Rp 081-8321 (180K)
Pattern should be connected
with soldering.
CdS back “C”
44