Minolta XE - Adjustment of Shutter Release Position and OFF of SW.2’; Arrangement and Soldering of Lead Wires

14
‘BiAdjustment of Shutter Release Position and OFF of SW.2’ |
MProceed as follows:
@ Temporarily set the top cover and
film advance lever to the body.
@ Shutter release position
@ Loosen 9612-1425-01 (two) so that
the shutter can be released at the
position where the shutter button
is lowered by 1.5mm and make ad-
justment of 0112.
@) Make adjustment
@Make adjustment so that it can be
turned OFF 0.3mm ahead of the
position in which the shutter is
released.
WAfter adjustment, carry out
soldering of lead wires.
(Refer to the following §)
9612-1425-01
‘BArrangement and Soldering of
Lead Wires