4948
FOR OWNERS OF THE QUARTZ-DATE MODEL
CHANGING THE DATE FORMAT
1. Press the date button until “SEt” appears on
the data panel.
2. Press and hold the select (SEL) button for
more than 2 seconds until all items on the
date display blink.
Continued on next page.
ADVANCED OPERATION
• Pressing the select (SEL) button until the date/time display stops blinking can
also set the calendar and clock.
3. Press the adjust (ADJ) button or zoom lever
to change the display format.
• The date format changes as follows:
`Y M D M D`Y D M`Y
4. Press the date button to set the date format.
• The camera will return to the shooting mode
automatically after five seconds. Pressing the date
button again or pressing the shutter-release button
partway down will also return the camera to the
shooting mode.
• Pressing the select (SEL) button until the date/time
display stops blinking can also set the date format.
To Next Page
Loading...
