6
Downloading your images to your
computer
Note: You do not need to install camera drivers for
Windows versions 2000/ME/XP and Mac OS 9.x or
OS X. Your camera does not support version older
than those stated above.
Note: When your camera is connected, your com-
puter provides power through the USB cable, saving
your camera‘s battery power.
Connecting your camera to the computer
To connect your camera to your computer, the ca-
mera must always be turned on fi rst. Then connect
the camera to your computer using the provided
USB cable (the smaller head connect to the ca-
mera side and the larger head side connect to the
computer side).
Deleting unwanted images
Delete your image one at a time
In Playback mode ( ), use the up or down buttons
to select the image you want to delete.
Press shutter button to view the Playback menu,
scroll to
Delete One
and press the shutter button.
Select
Yes
and press the shutter button again. The
selection is deleted from the camera memory.
Delete all your images at once
In Playback mode ( ), press shutter button to view
the playback menu, scroll to
Delete All
and press
the shutter button. Select
Yes
and press the shutter
button again. All saved images will be deleted from
the memory.
To Next Page
Loading...
Need help?
General
