button after confirming your
entry and you get to set the
UV-alarm. As soon as the set
UV-index value is reached the
SUNTIMER™ releases a warning
sound signal. Pressing the up-
and down button sets the
requested value of the UV-index.
For completion press the set
button and confirm your entry.
Mode
Mode
Set
You can also directly confirm your
single entries by pressing the
set button which will then get
you back into ALARM-mode.
The Alarm will sound for 2 mi-
nutes when the UV level reaches
the set limit or above, and resets
itself to “--”. Turn off the alarm
by pressing any button.
46 Functions 47
To Next Page
Loading...
General