Need help?Do you have a question about the minrray UV510A-20-ST and is the answer not in the manual?
Installation and operation must accord with electric safety standard.
Explains the external interfaces of ST, U3 (USB3.0), and U2 (USB2.0) series cameras.
Describes the initial setup process upon powering on the camera.
Details various video output methods including LAN, HDMI, 3G-SDI, USB, and HD-BaseT.
Details high-definition image, optical zoom, auto-focus, low noise, quiet PTZ, and multiple outputs.
Lists sensor, pixels, video format, optical zoom, view angle, aperture, and illumination.
Detailed explanation of remote controller keys and their functions.
Configures protocol, addresses, and baud rate for system control.
Adjusts camera parameters like exposure, color, image, focus, and noise reduction.
Resets camera settings to factory defaults, with options for yes/no.
Steps for logging into the web client via Internet Explorer for camera control.
Diagnoses and solutions for no video, no image, remote control, serial port, and web login problems.
To Next Page
General
