EasyManua.ls Logo

Minuteman UPS User Manual

Minuteman UPS
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User's Manual
Question and Answer IconNeed help?

Do you have a question about the Minuteman UPS and is the answer not in the manual?

Minuteman UPS Specifications

General IconGeneral
BrandMinuteman
ModelUPS
CategoryPower Supply
LanguageEnglish

Summary

Introduction

Safety Information and Symbols

Explains important safety instructions, attention symbols, and risk of electrical shock symbols.

Receiving Inspection

Procedures for inspecting the UPS upon arrival for shipping damage and handling warranty claims.

Electrical Safety Precautions

Warnings and precautions regarding electrical shock hazards and proper grounding during installation and use.

Para Systems Life Support Policy

Controls and Indicators

Front Panel Overview

Identifies and describes the components and indicators located on the front panel of the UPS.

Front Panel Indicators and Controls

Detailed explanation of front panel LEDs (On-Line, Fault, Overload, etc.) and the ON/OFF/Test button functionality.

Installation

Rear Panel Layout

Identifies and explains the purpose of all ports, connectors, and circuit breakers on the rear panel of the UPS.

Installation Placement Guidelines

Recommendations for selecting an appropriate location for installing the UPS, considering environmental factors.

Connecting Your Equipment

Instructions on how to connect peripheral devices to the UPS output receptacles and important warnings.

Connecting to AC Power Source

Guidelines for connecting the UPS to a grounded AC power outlet, avoiding extensions and surge strips.

Site Wiring Fault Check

How to check the Site Wiring Fault LED and the importance of correcting faulty wiring.

Battery Charging

Information on how the UPS charges its internal batteries and recommended charging times.

Optional Connections

Details on connecting the optional communications port and telephone/network surge protection.

Operation

Turning the Unit On/Off

Step-by-step instructions for powering the UPS unit on and off using the front panel button.

Self Test Functionality

Explains the purpose and procedure for performing self-tests to verify UPS and battery operational status.

DIP Switch Settings

Guide to configuring the UPS output voltage and other parameters using DIP switches.

Alarms and Notifications

Communications Port Pinout

Provides the pinout diagram and functionality for the DB9 communications port.

Troubleshooting

Replacing the Battery

Battery Specifications

Lists compatible battery models and part numbers for different SmartSine UPS units.

Battery Replacement Procedure

Step-by-step instructions for safely replacing the UPS batteries, including hot-swapping.

Battery Removal and Installation

Detailed steps for disconnecting old batteries, installing new ones, and ensuring correct polarity.

Obtaining Service

Specifications

Configurable Parameters and Settings

Customized Output Receptacle Panels

Limited Product Warranty

Warranty Limitations and Remedies

Further details on warranty exclusions, liability limitations, and available remedies for warranty claims.

Declaration of Conformity