MiVue
™
730 Series
2
1
B
A
Getting to know your dash cam
1
Device mount socket
2
Mini-USB connector
3
LCD screen
4
System indicator
5
Microphone
6
Power button (
) /
Function keys
7
Camera lens
8
Speaker
9
Memory card slot
10
Shutdown button
Function keys
The device provides 4 function keys to control the corresponding
icons displayed on the LCD screen. The keys' functions may vary
on different screens.
A. Recording screen
1
Opens the Menu screen.
2
Enters the Parking mode.
3
Adds a custom safety
(speed) camera.
4
Manually starts an event
recording.
B. Menu screen
1
Acts as the BACK button.
2
Acts as the ENTER button.
3
Moves to the previous option.
4
Moves to the next option.
Using your dash cam in a vehicle
Caution: Do not operate the device while driving. Using this product does
not change the requirement for a driver to take full responsibility for his or her
behavior. This responsibility includes observing all trafc rules and regulations
in order to avoid accidents, personal injury or property damage.
A. Make sure that your car is parked on level ground. Follow the
instructions to securely mount your dash cam in a vehicle.
B. When adjusting the angle of mounting, make sure that the
camera’s view is parallel with the level ground and the ground/
sky ratio is close to 6/4.
C. Route the cable through the top ceiling and the A-pillar so
that it does not interfere with driving. Make sure that the cable
installation does not interfere with the vehicle's airbags or
other safety features.
Note: The installation illustrations are for your reference only. If you encounter
any problems during installation, please contact a skilled installer (for
example, the service personnel of the vehicle) for assistance.
Using a memory card
Note: MiTAC does not guarantee the product’s compatibility with memory
cards from all manufacturers.
The dash cam supports the Class 10 memory cards with 8 GB –
128 GB capacity.
Hold the card (MicroSD) by the edges and gently insert it into the
slot as shown in the illustration.
To remove a card, gently push the top edge of the card inwards
to release it and pull it out of the slot.
Formatting a card
To format a memory card (all data will be erased), press >
Format.
Setting the date and time
To make sure that the date and time of your recordings are
correct, check the settings before you begin recording.
1. Press > Settings > Date/Time.
2. Do one of the following:
• Select Use GPS time, and then select the time zone of
your location. The system will set date and time according
to the GPS location.
Note: This feature is not available on all models.
• Select Manual, and the system will display the date and
time setting screen. Use / to adjust the value of
the selected eld; press and repeat the step until all
elds have been changed. When done, press .
Continuous recording
The dash cam automatically turns on once the vehicle engine is
started. The system will automatically start continuous recording
shortly after start-up. The recording may be divided into several
video clips; recording will not stop between video clips.
Event recording
By default, if an event happens such as sudden impact, high-
speed driving, an aggressive turn or an accidental crash during
continuous recording, the G sensor will prompt the dash cam to
start an event recording. The event recording can last up to 1
minute if the sensor is triggered repeatedly during the recording.
Parking mode
Note: This feature is not available on all models.
To enable the function, press > Parking Mode > Detection
> On.
When the Parking mode detection is enabled, the system will
enter Parking mode when the car stops moving for about 5
minutes. In the Parking mode, parking recordings could be
triggered only when movements or vibrations are detected. The
parking recording can last up to 1 minute if the sensor is triggered
repeatedly during the recording.
Camera mode
The dash cam allows you to take a photo: > Camera > .
Playback mode
1. Press > File Playback.
2. Select the desired type.
3. Select the desired file from the list and then press to
start playback.
System settings
Note: Not all setting items and options are available for all models.
To customise the system settings, press .
MiVue app
The MiVue app allows you to view, share and back up the videos
recorded on a MiVue dash cam via WIFI. Search for "MiVue" in
Apple App Store or in Google Play Store to download the app
for free.
Note: MiTAC does not guarantee the product’s compatibility with smartphones
from all manufacturers.
Setting up a WIFI connection
1.
Enable WIFI by selecting
> WIFI > On.
2. On your smartphone, open the MiVue app and follow the on-
screen instructions to set up the connection.
Note: The WIFI connection between your Mio and smartphone is not
Internet-enabled.
MiVue Manager
MiVue Manager™ is a tool for you to view the videos recorded
on a MiVue™ dash cam. Download MiVue Manager from the
Support page of Mio™ website (www.mio.com/support) and
follow the on-screen prompts to install it.
Playing the recording les
1.
Remove the memory card from the dash cam and access the
card on the computer via a card reader. You are advised to copy
the recording les to your computer for backup and playback.
2. Start MiVue Manager on the computer.
3. Double-click the desired le on the le list to start playback.
For more information
For the detailed information on using the dash cam, download
the User Manual from Mio website: www.mio.com
About GPS
Note: This feature is not available on all models.
GPS is operated by the United States government, which is
solely responsible for the performance of GPS. Any change to
the GPS system can affect the accuracy of all GPS equipment.
GPS satellite signals cannot pass through solid materials
(except glass). When you are inside a tunnel or building,
GPS positioning is not available. Signal reception can be
affected by situations such as bad weather or dense overhead
obstacles (such as trees, tunnels, viaducts and tall buildings).
The GPS positioning data is for reference only.
Declaration of conformity
For regulatory identification purposes, MiVue 730 Series is
assigned a model number of N583. Hereby, MiTAC declares that
this N583 is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU.
Visit Mio website (www.mio.com) for the full text of the declaration
for your device.
EN
1
2
3
4
5
10
6
7
8
9
1
2
3
4
5
6
7 8
9
10
4
1
2
3
4
5
6
) /
7
8
9
10
1
2
3
4
1
2
3
4
>
> >
/
>>
>
> >
>
3.
> >
TH
1
2
3
4
A
3
C
B
Quick Start Guide
EN
快速使用指南
简
快速使用指南
繁
TH
Hướng dẫn sử dụng nhanh
VI
Revision: R01
(12/2018)
1
2
3
4
Menu
1 2 3
To Next Page
Need help?
General
