17
store within the following temperature range: from 0˚ to 25˚C
(from 32˚ to 77˚F).
» Do not use a power and/or data cable that is not approved
or supplied by Miofive.
» Contact your local waste disposal department to dispose
of the Dash Cam/batteries in accordance with applicable local
laws and regulations.
G Sensor:
The G Sensor within the Dash Cam measures forces exerted
upon it, with reference to one g which is the nominal force
exerted upon us when stationary on the earth’s surface. The
G Sensor will also trigger to protect any recording currently in
progress, if a pre-determined threshold of force is exceeded.
The G Sensor protection will be adversely affected if the
Dash Cam is NOT mounted in the vertical direction i.e. with
the lens pointing to or from the direction of travel. G Force
information derived from a G Sensor is not warranted to be
totally accurate at all times, as it is derived from the G Sensor
through a sampling method over time. The precision of the G
Sensor value recorded depends upon when the acceleration
took place at the instance of the sample taken. The thresholds
to trigger the video protection rely upon a trigger value being
exceeded between two successive samples, in any one of the
three G Sensor axis. If the Automatic G Sensor protection does
NOT trigger during an event, then the EMER Video button
should be pressed, in order to protect the file. Protecting
the file can also be performed through the Miofive App for
applicable Wi-Fi models.
GPS:
The lines Dataset/s have been simplified in order to reduce the
number of track points required for detailed lines. Although
every effort has been made to ensure the correctness and
accuracy of the Dataset (Speed, Altitude, location etc), Miofive
makes no representations, either express or implied, as to
the accuracy, currency, completeness or suitability for any
particular purpose of the information and accepts no liability
for any use of the Dataset or any responsibility for any reliance
To Next Page
Loading...