To Next PageTo Next Page
Need help?Do you have a question about the MIP X-Duty and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Power Source | Electric |
| Terrain | Off-road |
| Drive Type | 4WD |
| LED Lights | Yes |
| Run Time | 20 minutes |
| Controller | 2.4GHz |
| Water Resistance | Splashproof |
| Weight | 2.5 kg |
Lists all components with part numbers and quantities for the MIP X-Duty kit.
Provides critical warnings regarding chemical exposure and first aid procedures.
Details the assembly of drive hubs and couplings, including lubrication and alignment.
Guides the assembly of the X-Duty shafts, emphasizing thread lock application and alignment.
Presents the final dimensions and critical angles of the assembled X-Duty shafts.
Highlights the importance of correctly aligning pin holes for proper function.
Identifies components for drive installation, noting excluded parts and specific requirements.
Offers key advice for drive installation, including using crush spacers and correct alignment.
