Need help?Do you have a question about the MIRABELLA GENIO and is the answer not in the manual?
Keep away from children, do not stare at lens, do not disassemble, indoor use only, use provided adaptor, avoid water.
Connect via Bluetooth, search for "Genio projector", voice prompt confirms pairing.
Wait for blue light to stop blinking, operate with onboard buttons (Sound, Power, Mode).
Connect to 2.4Ghz Wi-Fi, not 5Ghz. Verify SSID.
Ensure at least two bars signal, consider relocating or using extender.
Download "Mirabella Genio" APP from App Store or Google Play.
Turn on phone Bluetooth, hold projector power button until blue light blinks, open Genio APP, tap '+', select device, enter Wi-Fi credentials.
Connect power, wait for blinking. If not, hold POWER until rapid blue blink. Open Genio APP, tap '+', select Electrical > Star Projector.
Check phone settings (local network permission), Wi-Fi signal, router communication.
Verify correct 2.4Ghz Wi-Fi name/password, good Wi-Fi signal, 5Ghz off, iOS local network enabled.
On/off, LED color/speed, Profiles, Music, Timer/Countdown.
Address issues like reconnecting, changing networks, or offline status.
To Next Page
General