Miracall Technology mc-50

To Next Page

Key Phone

MC-50

Operation Manual

Content

I .Introduction ------------------------------------------------------------ 1

II. Technical Parameter -------------------------------------------------------------2

III. Function Key Introduction --------------------------------------------------------3

IV. Operation Instruction------------------------------------------------------------4

Main Page

Need help?

Do you have a question about the Miracall Technology mc-50 and is the answer not in the manual?

Summary

Introduction

Technical Parameter

Function Key Introduction

CHK;CLR Key

Clears data or returns to normal mode.

TH;TL KEY

Navigates caller ID numbers and checks 50 groups number.

PAGE Key

Pages external loud speaker and key phones.

CONF Key

Used for making conference calls.

Volume Keys

Adjusts volume for speaker, handset, earphone, and ring.

SPK. Key

Enables hand-free talking.

MUTE Key

Mutes microphone during conversations.

TRFR Key

Transfers calls or switches to night service mode.

ICM Key

Used for making an internal call.

LINE Key

Selects a CO Line for calls.

REDIAL Key

Redials the last dialed number.

FLASH Key

Ends a call without hanging up.

FW;DND Key

Forwards calls or sets Do Not Disturb.

HOLD Key

Holds a CO line during conversation or saves program.

Incoming Call Light

Visually indicates incoming calls with a lamp.

LCD Display

STN display module showing call status, time, etc.

Direct Selection Key

Enables one-touch dialing for extensions and lines.

CHECK, CLEAR Key

For system and key programming.

Operation Instruction