Need help?Do you have a question about the Mirage 590I and is the answer not in the manual?
General| Configuration | 2-way |
|---|---|
| Nominal Impedance | 8 ohms |
| Tweeter | 1" titanium dome |
| Sensitivity | 90dB |
| Woofer | 6.5" polypropylene cone |
Explains the 360-degree sound dispersion pattern of the bipolar design for immersive audio.
Specifies minimum distance from rear wall and equal distance from side walls for optimal placement.
Provides guidelines for speaker separation distance and listener distance.
Explains the standard method of connecting speakers using shorting straps.
Details the bi-wire connection method, requiring removal of shorting straps and separate cables.
Explains amplifier clipping, its identification (fuzzy/distorted sound), and how to avoid speaker damage.
Emphasizes the importance of reading technical notes before operating the speakers.
Explains how amplifier volume controls and tone adjustments can lead to overpowering.
Defines clipping, its identification (fuzzy/distorted sound), and the risk of speaker damage.
Warns that continuous clipping will cause permanent damage or burnout to the speakers.
To Next Page
