Mirage A-1015-G User Manual

WARNING !
IMPORTANT NOTICE
FCC type acceptance requirments prohibit sales of amplifiers operating
below 144 MHz with internal RF sensing circuits that place the
amplifier in a transmit mode. Because of those rules. this amplifier is
not shipped with an internal RF activated relay system.
You are, as a licensed amateur radio operator, allowed to make those
modifications yourself.
DO NOT
connect this amplifier to a radio without connecting an
external control line for the internal relays. If the pre-amplifer is turned
on, and transmitter power is applied without an external relay control
line, pre-amplifier will be damaged.
If you have any questions about the operation of this amplifier, contact
Mirage at (601) 323-8287 before attempting to use this amplifier.

Mirage A-1015-G Specifications

General

Brand	Mirage
Model	A-1015-G
Category	Amplifier
Language	English

Summary

Important Safety Notice

Product Specifications

Installation Guide

Front Panel Switches and LEDs

Details the function of each switch and status indicator on the front panel.

Rear Panel Connectors

Identifies and explains the purpose of all connectors on the rear panel.

Internal Adjustments and Troubleshooting

Internal Adjustments

Describes user-adjustable settings like delay time and pre-amp gain.

Troubleshooting Common Issues

Provides a checklist for diagnosing and resolving common operational problems.

Technical Assistance Contact

Information on how to contact Mirage for support and problem resolution.

Schematic Diagram