Mirage HDMIRAGE10 User Manual

Assembly & User Instructions
Mirage 38,200Btu
Heat Focusing Patio Heater
These instructions are for your safety. Please read them
thoroughly before use and retain them for future reference
DANGER:
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the
appliance and immediately call your gas
supplier or fire department.
WARNING:
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance.
An LP-cylinder not connected for use shall
not be stored in the vicinity of any other
appliance.
WARNING:
For Outdoor Use Only.
WARNING:
Improper installation, adjustment, alteration,
service or maintenance can cause
injury or property damage.
Read the installation, operating and
maintenance instuctions thoroughly before
installing or servicing this equipment.
W
e pr
ovide a
Customer Suppor
t Ser
vice
.
If you have any queries please contact us
on info@uig.biz or tel. (678) 534 2876
or visit our website www.uig.biz

Mirage HDMIRAGE10 Specifications

General

Brand	Mirage
Model	HDMIRAGE10
Category	Patio Heater
Language	English

Summary

Assembly & User Instructions

Safety Warnings and Precautions

Critical safety alerts including danger notices and warnings for gas leaks and proper usage.

Parts Supplied

Assembly Step 1: Base Assembly

Instructions for attaching cylinder chamber supports to the base unit.

Assembly Step 2: Lower Support Pole Installation

Guidance on connecting the lower support pole to the cylinder chamber supports.

Assembly Step 3: Cylinder Chamber Wall Fitting

Process for fitting the cylinder chamber wall to the support structure.

Assembly Step 4: Cylinder Chamber Door Hinging

Assembly Step 5: Cylinder Chamber Top Attachment

Assembly Step 6: Upper Support Pole Connection

Assembly Step 7: Lantern Securing

Assembly Step 8: Regulator and Leak Testing

Connecting the regulator and performing essential leak testing procedures.

Assembly Step 9: Reflector Handle Fitting

Assembly Step 10: Parasol Assembly

Leak Testing Procedures

Detailed steps for performing gas leak tests on the appliance and its connections.

Gas and Regulator Setup

Siting Instructions

Connecting to Gas Cylinder

Use Instructions

General Warnings

Comprehensive safety warnings covering usage, modifications, clearances, and unattended operation.

Technical Data