Mirage SERIES A User Manual

WARNING: If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury or loss of life.
-- Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
-- WHAT TO DO IF YOU SMELL GAS
- Do not try to light any appliance.
- Do not touch any electrical switch; do not use any phone in your building.
- Immediately call your gas supplier from a neighbour’s phone. Follow the
gas supplier’s instructions.
- If you cannot reach your gas supplier, call the fire department.
--Installation and service must be performed by a qualified installer, service
agency or the gas supplier.
SERIES A
DIRECT VENT
FIREPLACE INSERT
Direct Vent Insert
INSTALLATION
AND
OPERATING
INSTRUCTIONS
IMPORTANT: THESE INSTRUCTIONS ARE TO REMAIN WITH THE HOMEOWNER
200598-24 DVI-INST # 5055.65
f i r e - p a r t s . c o m

Mirage SERIES A Specifications

General

Model	Mirage SERIES A
Fuel Type	Electric
Voltage	120V
Remote Control	Yes
Thermostat	Yes
Safety Features	Overheat Protection
Flame Effect	Yes

Summary

Safety Information

General Safety Precautions

Covers hazards, child supervision, and precautions regarding flammable materials.

Maintenance Recommendations

Clearances to Combustibles

Minimum Clearance Specifications

Venting System Installation

Approved Venting Components

Lists approved Flex Liner kits, Vent Terminals, and Simpson Dura-Vent termination kits for installation.

Vent Terminal Mounting

Gas and Burner Installation

Gas Supply Connection

Burner Assembly Mounting

Provides steps for removing the glass frame and installing the burner assembly into the firebox.

Surround Assembly

Surround Trim Installation

Operation and Adjustments

Manual Flame Control

Explains how to rotate the HI-LO control knob for infinite control of gas flow to the burner.

Primary Air Adjustment

Details how to adjust air shutter rods to control flame height and quality for optimal combustion.

Lighting and Shutdown Procedures

Pilot and Burner Lighting

Provides detailed steps for safely lighting the pilot and burner, including safety warnings.

Appliance Shutdown Process

Optional Blower Installation

Blower Electrical & Mounting

Replacement Parts

Parts List and Order Numbers

An itemized list of all available replacement parts, including part numbers for ordering.

Safety Label Information

Label Warnings and Clearances

Summarizes critical warnings, installation requirements, and minimum clearances listed on the appliance's safety label.