When mounted between the camera body and microscope, this adapter makes microscopic picture-taking
extremely easy.
· The camera lens is taken off.
· The viewfinder may be interchanged with critical focuser VF3 for easier focusing.
How to Attach
(I) Attach adapter to camera body. (z) The connection piece at the end is turned counter-clockwise and
detached. (3) Take off microscope's eyepiece and attach it to the inside of the connection piece (Picture at
left). r4) Insert into microscope's eyepiece as before, match the red spots on tube and bayonet mount of
connection piece, set to position to be used and tighten the connection piece's screw (Picture at right).
To Next Page
