CLICK HERE FOR OTHER ACCESSORIES
LENS: AUTO-MIRANDA 50mm f/I.8, 4-group 6-element or 50mm fI.4 6 group8 element Gauss type, spectra-hard coated, fully
automatic diaphragm coupled to through-the-lens CdS exposure meter, smallest aperture f/l6, preview lever, closest focus at 45cm (17"0
uses screw-in 46mm filter.
SHUTTER: Focal plane type, speeds of I -1/1000 sec., plus B.
FLASH SYNCHRO: FP 8t X (X at I /60th)
VIEWFINDER: Pentaprism, interchangeable with waist-level types, magnification 0.92X.(with 50mm f/I.8 at infinity), condenser and
Fresnel lens combined.
FOCUSING: Pentaprism with multi-microprism grid.
LENS MOUNT: Miranda Mount, bayonet and screw mounts.
LENS INTERCHANGEABILITY: Accepts Miranda as well as other automatic and preset lenses.
EXPOSURE: Through-the-lens CdS light measuring (I) at full aperture, (z) at closed aperture, or (3) through selective spot or average
reading, match-needle visible in the finder, measuring range EVI-I8(l4~(ASA 100) film speed range ASA Z5-I600, CdS sensing spot in
the center of the mirror, area of CdS sensor 5% of total mirror area, uses Mallory ~ 6z, mercury battery or equivalent.
FILM ADVANCE: Single or several short strokes of lever.
FILM REWIND: Rewind knob with collapsible crank, self-resetting release button
FILM COUNTER: Advance counting type with film wind (shutter cocking) indicator.
OTHER FEATURES: Double exposure prevention, ASA speed indicator, lens speed selector with settings from f/I.4 to f/8, hinged back
cover with double safety self-locking device (entirely detachable from camera body).
SIZE: I46 x 94 x 86mm (thickness of body 52mm).
WEIGHT: w/50mm fI.8 1000 grams w/5omm fI.4 1100 grams Body only 6So grams
CARE AND STORAGE OF CAMERA--
When used on the beach, in strong wind or other unfavorable conditions, damage may be caused if left unattended, so please observe the
following precautions:
CARE AFTER USE
· Clean the lens of dust and dirt by using a soft brush lightly, but do not clean too often.
· Use chamois or other soft material to clean the chrome plated parts.
Always use a blower to clean the mirror, which must never be touched with fingers.
PRECAUTIONS IN STORING
· Avoid places of high temperature or high humidity.
· Be careful to avoid shocks as they may cause damage.
To Next Page
Loading...
