Miranda sensorex - Page 14

4. Po sition take-up spool
slit
T urn the bottom knurled
flange
of take-up spool with
a finger until slit appears.
12
5. In se rt tip of film into
spool's film slit
Insert end of film, making
sure
that one perforation is
caught by the claw at the
entrance
of the film slit.
Also see
that the sprocket
engages the film perforation.
6. Turn film a dvanc e l eve r
until perforations
on b oth
s id es of film are en gage d
by th e sprocket
If one winding fails to
make sprocket -catch the per-
forations on both sides
of
the film, press shutter button
and wind again.