MiraScreen K6 - User Manual

To Next Page

How to update firmware through PC

You will learn how to update

MiraScreen K6

’s

Firmware by our PC tools through following

methods.

The tool you may need:

1. Micro USB cable: To connect MiraScreen dongle with your PC.

2. Paper pin: To short circuit pins

3. A Windows Based PC, recommend Win 7 or above.

Please follow the methods to update FW.

Step 1: Download MiraScreen Repair Tool to your PC

Downloaded the update package to your Windows PC. Uncompressed

the file.

Uncompressed the downloaded file and unfold the usb_driver, click

“install” to install repair tool.

Need help?

Do you have a question about the MiraScreen K6 and is the answer not in the manual?

MiraScreen K6 Specifications

General

Lists essential items: Micro USB cable, paper pin, and a Windows PC (Win 7+).

Download the MiraScreen Repair Tool package, uncompress, and install the USB driver.

Carefully open the MiraScreen dongle casing along the designated parting line.

Connect USB cable, short pins 7 & 8 of NAND flash, and connect PC to the dongle.

Click 'Download' in EZCastUpdate, ensure internet, and proceed to 'Upgrade' when ready.