Mircom FleX-Net User Manual

111
Type
Yes
The process Type of the Device. Can be edited (combo box). The
list of Types shown in the combo box will depend on the Device.
E.g. Device Relay Output Module can be assigned Relay, Signal
or Strobe.
SubType
Yes
Additional refinement of the type. Always has a value of "None"
for Input Zones.
Code
No
Applie
s only to input zones.
Sens Lvl Pre
On
Addressable
Loops.
The Pre
-alarm (or for some device types the trouble) sensitivity
level. Optional.
Sens
On
Addressable
Loops.
The alarm level 1 sensitivity of the sensor. Displays a combo with
sensitivity in appro
priate units for the device type. Required for
sensors.
Sens Lvl 2
On
Addressable
Loops.
The alarm level 2 sensitivity of the sensor. Displays a combo with
sensitivity in appropriate units for the device type. Optional.
Sens Lvl 3
On
Addressable
Loops.
The alarm level 3 sensitivity of the sensor. Displays a combo with
sensitivity in appropriate units for the device type. Optional if
Lvl2 specified.
Sens B Lvl
Pre
If after hours
specified.
The after hours and night time
Pre-alarm (or for some device
types the trouble) sensitivity level. Optional.
Sens B
If after hours
specified.
The after hours and night time alarm level 1 sensitivity of the
sensor. Displays a combo with sensitivity in appropriate units for
the device t
ype. Required for sensors.
Sens B Lvl 2
If after hours
specified.
The after hours and night time alarm level 2 sensitivity of the
sensor. Displays a combo with sensitivity in appropriate units for
the device type. Optional.

Mircom FleX-Net Specifications

General

Brand	Mircom
Model	FleX-Net
Category	Fire Alarms
Language	English