MIRKA® DUST EXTRACTOR 1230
Today, health and safety issues are becoming more and more important.
Sanding tools and abrasives are made more and more ecient, with focus
on dust-free applications. This development places higher requirements on
the dust extractors. To meet these demands, the Mirka dust extractor range
has been extended with new versions of Mirka dust extractors:
Mirka® Dust Extractor 1230 L PC
Mirka® Dust Extractor1230 L AFC (AutoFilterCleaning)
Mirka® Dust Extractor 1230 M AFC (AutoFilterCleaning)
The 1230 dust extractor range is equipped with a high-performance 1200 W motor and a 1-stage turbine
that creates 250 mbar suction with an airow of 4500 l/min. The new 1230 dust extractors include the
auto-start function. As the dust extractor only runs when the power tool is in use, thanks to the auto start
function, there is less noise and at the same time the dust extractor gains a longer lifetime. Bigger wheels
signicantly improve maneuverability on uneven oor surfaces. Another advantage is that the lter is
easy to reach through a separate opening in the back without removing the upper part.
Mirka Dust Extractor 1230 L PC 230V
EAN: 6416868904444
IMPROVE YOUR PERFORMANCE
This professional dust extractor has a high performance
motor and turbine, which creates 250 mbar vacuum and
4500 l/min air ow. The AutoStart function increases the
lifetime of the motor and reduces noise. A eece dust bag
is also included.
Mirka Dust Extractor 1230 L AFC 230V
EAN: 6416868904727
Flat top with space for storage and large wheels for better
maneuverability. Auto-lter cleaning for convenience
and consistent performance. Hose and cable storage for
more comfortable transportation. A eece dust bag is also
included.
Mirka Dust Extractor 1230 M AFC 230V
EAN: 6416868252521
This professional M-class dust extractor has a high
performance motor and turbine, which creates 250 mbar
vacuum and 4500 l/min air ow. Auto-lter cleaning for
convenience and consistent performance, as well as an
air-ow sensor which indicates when air ow falls below
optimal. A eece dust bag is also included.
©Mirka Ltd 202399 AA-MA012017FG
For more information please visit www.mirka.com and check our videos on the Mirka YouTube channel
Mirka Ltd Finland
Technical Specifications
Mirka® Dust Extractor 1230 L / M
Voltage mains supply 220 – 240 V ~
Mains frequency 50/60 Hz
Power input 1200 W
Volume flow air 4500 l/min
Vacuum 250 mbar
Noise level, LpA 60 dBA
Tank volume 30 l
Dimension W x D x H 385 x 565 x 565 mm
Weight 14.5 kg
Cable storage Simple and effective. The durable
strap keeps the cable in place during transportation.
Easily accessible flat filter
The filter is easy to reach
through a separate opening in
the back without removing the
upper part.
Big wheels Significantly improves
maneuverability on uneven floor
surfaces.
Hose storage Keeps the
hose and dust extractor
placed together.
AutoStart function As the
dust extractor only runs when
the power tool is in use, the
dust extractor gains a longer
lifetime and makes less noise.
Note! When used together with
pneumatic tools an additional
accessory is needed
Flat top Space for storage
during use.
Air intake filter Longer life
time of motor. A (PET) filter is
available as an accessory for
even better protection.
High-performance A 1200 W motor and a 1-stage turbine that creates
250 mbar suction with an airflow of 4500 l/min. These features make
the dust extractor well suited for Mirka applications.
Cable High quality and long reach.
To Next Page
Need help?
General
