To install
1. Cable bond
Attach the fixing part of the humidification engine to the groove of the lower
body.
*If not correctly fitted, the medium torso and the upper
body will not be assembled.
2. Combine Humidification Engine
Place the humidity engine in the lower body as shown
in the picture next to it.
*Please join me at 90 degrees as shown in the picture.
3. Waterproof Fan Combination
Install the side marked 'IN' in the
waterproof pan with the arrow pointing
downwards.
4. Cervical coupling
Fit the medium pain into the lower groove of the body.
Neodium magnets are applied to the main joint for easier assembly.
*If the medium is incorrectly coupled, it can
affect the amount of humidification
.
To Next Page
Loading...
